CNC MACHINING SERVICES

Aircraft components vintage & modern manufactured on-site in the heart of Bedfordshire, right next to Shuttleworth (Old Warden) Airfield. From CNC machining a single aluminium cylinder block to multiple acrylic lighting parts, Kennet offers precision, speed and consistency.

Contact a Kennet Engineer Now

Kennet Engineering Plant List

Mazak QuickTurn 250MSY

Kennet Engineering CNC Machining Plant

High Performance for demanding workpiece applications

  • Specifications designed to meet your production requirements  – Milling function and Y-axis
  • Tailstock travel and thrust is controlled by a servo motor
  • Standard 5000 min⁻¹ and optional high speed 10000 min⁻¹ meet the requirements of a wide variety of materials
  • The low thrust force ensures high accuracy turning even for small diameter shaft workpieces
  • Advanced features of the Mazak SmoothG CNC
SPECIFICATION BED LENGTH – 20 IN / 500 MM
Capacity Maximum Swing 26.50 in / 675 mm
Maximum Machining Diameter 14.750 in / 380 mm
Maximum Bar Work Capacity 3.0 in / 65 mm
Maximum Machining Length 21.275 in / 541 mm
Main Spindle Chuck Size 10 in / 254 mm
Maximum Speed 4000 rpm
Motor Output (30 minute rating) 35.0 hp / 26 kw
Second Spindle Chuck Size 6 in / 152 mm
Maximum Speed 6000 rpm
Motor Output (30 minute rating) 15.0 hp / 11 kw
Turret (Upper) Number of Tools 12
Maximum Speed 6000 rpm
Motor Output (10 minute rating) 10.0 hp / 8 kw
Feed Axes Travel (X Axis) 9.00 in / 230 mm
Travel (Y Axis) 4.00 in / 102 mm
Travel (Z Axis) 22.63 in / 575 mm
Travel (W Axis) 23.00 in / 585 mm

Mazak VCN-530C

Kennet Engineering CNC Machining Plant

Highest productivity in this class of vertical machining centers.

  • Reduced cycle times thanks to high speed feedrate, acceleration / deceleration and tool change
  • Feedrate: 42 m/min, Spindle speed: 12000 rpm, Chip-to-chip: 2.8 seconds
  • Unique Mazak heat compensation system – INTELLIGENT THERMAL SHIELD
  • Excellent accessibility thanks to two front doors providing wide opening – large window for convenient   monitoring of machining
  •  Durable linear roller guides on all axes ensure stable machining
  •  MAZATROL SmoothG, the advanced CNC designed for ease of operation
Standard Machine Values
CAPACITY Work table cross dimension 1,300 mm
Work table longitudinal dimension 550 mm
Table: cross-wise travel amount (X-axis) 1,050 mm
Saddle: back & forth travel amount (Y-axis) 530 mm
Spindle head: up & down travel amount (Z-axis) 510 mm
SPINDLE Spindle taper bore 7/24 taper, No.40
Rotating speed maximum 12,000 min-¹
FEED RATES Rapid traverse rate (X-axis) 42 m/min
Rapid traverse rate (Y-axis) 42 m/min
Rapid traverse rate (Z-axis) 42 m/min
ATC MAGAZINE Magazine capacity (standard) 30
Tool shank CAT 40
MACHINE SIZE Width 2,950 mm
Length 3,139 mm
Contact a Kennet Engineer Now

Axiom Too CMM

CNC Machining Inspection Plant

The Complete Shop Floor Inspection System

The all aluminium bridge structure not only ensures that the Axiom too has low inertia and high acceleration to get the job done quickly, but also that the temperature of the machine rapidly follows the temperature of the room, ideal when the CMM is not housed in a controlled environment. Temperature compensation in the software reports results as if they had been measured at 20°C/68°F

The solid granite table, originally developed for the optics industry, provides fantastic natural damping of high frequency vibration and the granite Y rail allows pre-loading of the bridge air bearings in both directions for superior accuracy.

Capacity – X = 640mm, Y = 1200mm, Z = 500mm

Contact a Kennet Engineer Now